Winpact Evo Fermentation System / Fermenter, FS-07 series

Controller

Duo heating system controller

Built-in rotameter

4 built-in pump heads

Vessel

Double Jacketed Dish Bottom Vessel (includes glass body, head plate, T-handling bar, 2 probe adaptors)

Single Wall Dish Bottom Vessel (includes glass body, head plate, T-handling bar, 2 probe adaptors)

Air Lifter Vessel (includes glass body, head plate, draft tube, T-handling bar, 2 probe adaptors)

Single Wall Dish Bottom Vessel with Heating Blanket (includes glass body, head plate, T-handling bar, 2 probe adaptors and heating blanket)

Single Wall Plain Bottom Vessel with Heating Base Unit (includes glass body, head plate, T-handling bar, 2 probe adaptors and heating base unit)

Solid State

(FS-V-SA05P)

Rushton-type impellers

No impellers

Rushton-type impellers

Multi-Type

Baffle assembled

Draft tube assembled

Baffle assembled

N / A

Condenser assembled

Air sparger assembled

Micro sparger assembled

Air sparger assembled

Agitation motor

Brushless motor

N / A

Brushless motor

Brushless motor

Probes

1x pH probe and 1x probe cable

Optional

1x DO probe and 1x probe cable

Optional

1x Temperature probe and 1x probe cable

1x anti-foam/level sensor and 1x probe cable

N / A

Start-up kit

Complete start-up kit includes silicone tubes, tube clamps, metal connector and autoclavable disc filters. Please see p.35 for details.

Vessel

Double Jacketed (FS-V-A series)

Single Wall (FS-V-B series)

Air Lifter (FS-V-C series)

Working volume

500 ml

1 L

3 L

5 L

10 L

1 L

3 L

5 L

10 L

5 L

Total volume

1 L

1.5 L

3.8 L

6.8 L

12.5 L

1.5 L

3.8 L

6.8 L

12.5 L

7 L

Vessel

Single Wall with Heating Blanket (FS-V-B series)

Single Wall with Heating Base Unit

(FS-V-D series)

Solid State

(FS-V-SA05P)

Working volume

1 L

3 L

5 L

10 L

15 L

20 L

3 L

5 L

10 L

5 L

Total volume

1.5 L

3.8 L

6.8 L

12.5 L

18.7 L

23.7 L

3.7 L

6.7 L

13.1 L

6.8 L

Power source

100-120V / 210-230V, 50-60Hz with electrical safety cutoff switch

Water source

0.4-1 bar (5.8-14.5 psi); water supplied to fermentors should be at least 15°C below the set operating temperature

Air source

0.5-2 bar, must be dry, oil-free and filtered

Sterilization

Autoclave; size of the autoclave's inner chamber must be able to accomodate vessel with condenser attached

Control unit

 Control panel

 10.4” color touch-screen Interface (Resolution: 800 x 600 pixels)

 Communication port

 Remote software control through Ethernet, up to 16 systems per PC

 Data export through USB port

 Analog AUX port for system extension

 Program storage

 Up to 59,994 programs for different kinds of condition

 Log data storage

 Up to 100 process monitoring data files

 Cabinet material

 ABS front panel and painted iron housing

 Dimension

 Footprint: W x L = 15.75" x 23.62" (400 mm x 600 mm); Height: 29.14" (740 mm)

 Rated voltage

 110V~/220V~; 50/60 Hz, 10A

Weight

 Approx. 88.18 lb (40 kg)

Aeration

 Inlet gas flow-meter

 0, 0.4-5 LPM (0.5, 1 L);  0, 1-10 LPM (3, 5 L); 0, 2-20 LPM (10 L); 0, 4-50 LPM (15, 20 L)

 Sparger

 L-shape (500ml, 1L); Ring sparger (3L and above); Micro-sparger (C type vessels);

Center-located sparger (solid state)

 Baffle

 316L stainless steel baffles

• 0.5-3L vessel: fixed, unmovable

• 5L and above vessel: removable

Temperature

Heating

 1. Thermostat system: built-in heat exchanger  (550W heater, water circulation pump)

 2. Dry heating system (heating blanket or heating base unit)

Cooling

 Built-in water module and external water circulator (optional)

 Range

 - FS-V-A/ B / SA05P series: 5℃ (41℉) above coolant up to 60℃ (140℉)

- FS-V-C series (Double Jacketed): 5℃ (41℉) above coolant up to 60℃ (140℉)

- FS-V-C series (Single Wall): without temp control

- FS-V-D series : 5℃ (41℉) above coolant up to 90℃ (194℉)

* Antifreeze is required to apply

 Probe

 Platinum RTD probe (PT-100), non autoclavable

 Control mode

 Manual or programmable 15-step PID control

Agitation

 Drive

 Removable top brushless motor (M3 for 0.5 L, 1 L; M2 for 3~20 L; M4 for solid state)

 Speed range

a. For Pitched blade impeller: 30-300 rpm

b. For Rushton impeller: 30-1800 rpm(0.5, 1L); 30-1200 rpm(3, 5L); 30-1000 rpm(10L); 30-700 rpm (15, 20L)

c. For Broken type/Spiral type/Anchor type impellers (only for FS-V-SA05 vessel): 1 – 60 rpm**

 Resolution

 1rpm increment

 Impeller

 2 impellers for 0.5 L &1 L vessel and 0.5-5 L Double Jacketed Vessel

 3 impellers for 3 L vessel and above; for 10 L Double Jacketed Vessel

 Note: customized impellers are available upon ordering

 Control mode

 Manual or programmable 15-step PID control

pH 

 Range

 0 -14 (2-12 for maximum precision)

 Resolution

 0.01 pH

 Probe

 Gel-filled electrode, autoclavable

 Control mode

 Manual/programmable 15-step PID control with adjustable deadband

 pH Stat with smart feeding technology

DO

 Range

 0-200%, Control range: 0-100%, adjustable

 Resolution

 0.10%

 Probe

 Polarographic DO sensor; autoclavable

 Control mode

 2-stage DO cascade response

 a. Increase or decrease agitation speed 

 b. Supply external oxygen source (oxygen enrichment module required, optional device) 

 c. Adjust DO level using gas mixing control (gas mixing station module required, optional device)  

 Substrate feeding strategy

 DO Stat with smart feeding technology

ORP(optional)  

 Measurement range

 ± 2000 mV

 Resolution

 1 mV    

 Probe

 Gel-filled electrode: autoclavable    

Foam / level

 Probe

 316 L stainless steel protector with insulated PTFE tube, autoclavable, adjustable sensitivity control

Control mode

 Foam: on/off switch

 Level: on/off switch control with wet/dry probe set up

Peristaltic pump

Pump number

 4 built-in Watson Marlow pumps;

 2 external pumps expandable:

• 1 external pump: MU-D series required (optional)

• 1 external pump: 4-20mA or DC 0-10V analog input

 **The minimum speed varies from 1-5 rpm depending on the medium viscosity.

 Motor type

 Precise stepping motor; minimum speed is 1 rpm

 Speed range

 0 - 65 rpm

 Resolution

 1 rpm

 Control mode

 Manual or programmable 15-step feeding control; pump can be assigned for acid, base,      

 antifoam and/or substrate; pump can calculate flow rate and total volume

Exhaust

Device type

 316L stainless steel condenser