Product Name : Mini Wide Vertical Gel Electrophoresis Apparatus, MV-10WDSYS
Product Introduction

Mini Wide Vertical Electrophoresis System (MV-10WDSYS) with a gel width of 20cm effectively doubles the number of samples that can be resolved when compared to the Mini Vertical Electrophoresis System. This allows consistency of sample comparison on a single gel and is designed for those with greater than 20 samples to compare and resolve. Simple set up using ultra soft silicone seals guarantees trouble free glass plate loading and gel casting. Dual gaskets on the gel running insert along with notched and plain glass plates ensure leak proof gel running. Rapid set up cooling retains resolution in extended separations and also saves buffer volume without affecting run quality. 4mm thick glass plates reduce breakage and have bonded spaces for added convenience. A wide range of accessories are available to allow for many techniques to be performed using the same unit. Prep combs can be used to maximize sample loading and recovery.

MS02_Electrophoresis* Marketing video

• Offers the capacity of two mini gels on a single gel

• Rapid gel casting and loading

• Low buffer consumption

• Run up to 4 gels at one time

• Great indications for gel making and running

• Ice cooling pack

• Easy gel casting and no gel leakage

• Competitive pricing

This product is offered as a complete system for the user to cast, and run electrophoresis. It including:

• 1 x Electrophoresis tank & lid & inner running module

• 1 x MV-10WNG (200x100mm notched glass plates, 2mm thick, pk/2)

• 1 x MV-10WPGS1 (200x100mm plain glass plates with 1mm bonded spacers, pk/2)

• 1 x MV-10WDP (dummy plate)

• 2 x MV-20-24-1 (24  sample combs, 1mm thick)

• 1 x MV-20DCAST (200x100mm casting base )

• 1 x MV-20ICB (mini cooling pack)

• 1 x MS-DAG-GT01 (sillcone water repellent spray 5ml)

• 1 x Black & red electrophoresis cable

 

Cat. No.

MV-10WDSYS

Dimension (WxLxH)

Approx. 10.2"x6.3"x6.3" (260x160x160mm)

Plate Dimension (WxL)

Approx. 7.9"x3.9" (200x100mm)

Gel Dimension (WxL)

Approx. 7.1"x3.2" (180x80mm)

Maximum Sample

192 samples, 48 samples per gel

Buffer Volume

0.16gal - 0.74gal (600 - 2800ml)

Ice Cooling Pack

Yes

Dummy Plate And Casting Base

Yes

Electrical Safety

Lid can be fastened in only one way

 

Upon lid removal, power is disconnected from buffer chamber

Rapid Casting Gel

Use gel maker stand

Cat. No.

Product Description

MV-10WDSYS

Mini Wide Vertical Gel Electrophoresis Apparatus

 

Mini Wide 200x100mm Dual, 2 sets of glass plates with 1mm thick bonded spacer

 

2x24 sample, 1mm thick combs, cooling pack, dummy plate and casting base

MV-10WNG

200x100mm notched glass plates, 4mm thick (pk/2)

MV-10WPG

200x100mm plain glass plates, 4mm thick (pk/2)

MV-10WPGS0.75

200x100mm plain glass plates with 0.75mm bonded spacers (pk/2)

MV-10WPGS1

200x100mm plain glass plates with 1mm bonded spacers (pk/2)

MV-10WPGS1.5

200x100mm plain glass plates with 1.5mm bonded spacers (pk/2)

MV-10WPGS2

200x100mm plain glass plates with 2mm bonded spacers (pk/2)

MV-10WNGS0.75

200x100mm notched glass plates with 0.75mm bonded spacers (pk/2)

MV-10WNGS1

200x100mm notched glass plates with 1mm bonded spacers (pk/2)

MV-10WDP

Dummy plate, 200x100mm


 Optional combs

Accessories

MV-20DCAST

Maxi, casting base for MV-10WDSYS and MV-20DSYS

MV-20DCASTM

Replacement Rubber mats for MV-10WDSYS and MV-20DSYS casting base

MV-20DIRM

Maxi, Inner Running Module

MV-20ICB

Maxi Cooling Block.

MV-20LID

MV-20 lid (No cables)

MV-20TANK

MV-20 Tank

MV-20NG

20 x 20cm Notched Glass Plates 4mm thick ( Pack of 2)

MV-20PG

20 x 20cm Plain Glass Plates 4mm thick ( Pack of 2)

MV-20PGS0.75

20 x 20cm Plain Glass Plates with 0.75mm Bonded Spacers (Pack of 2)

MV-20PGS1

20 x 20cm Plain Glass Plates with 1mm Bonded Spacers ( Pack of 2)

MV-20PG1.5

20 x 20cm Plain Glass Plates with 1.5mm Bonded Spacers (Paxk of 2)

MV-20PG2

20 x 20cm Plain Glass Plates with 2mm Bonded Spacers (Pack of 2)

MV-20NGS0.75

20 x 20cm Notched Glass Plates with 0.75mm Bonded Spacers (Pack of 2)

MV-20NGS1

20 x 20cm Notched Glass Plates with 1mm Bonded Spacers ( Pack of 2)

MV-20DP

Dummy Plate, 20 x 20cm

MV-20S0.75

20cm Spacers - 0.75mm (Pack of 2)

MV-20S1

20cm Spacers - 1mm thick (Pack of 2)

MV-20S1.5

20cm Spacers - 1.5mm thick (Pack of 2)

MV-20S2

20cm Spacers - 2mm thick (Pack of 2)

Optional combs

MV-20-1-0.75

Comb 1 Prep, 1 Marker, 0.75mm thick

MV-20-5-0.75

Comb 5 sample, 0.75mm thick

MV-20-10-0.75

Comb 10 sample, 0.75mm thick

MV-20-18MC-0.75

Comb 18 sample MC, 0.75mm thick

MV-20-24-0.75

Comb 24 sample, 0.75mm thick

MV-20-30-0.75

Comb 30 sample, 0.75mm thick

MV-20-36MC-0.75

Comb 36 sampl MC, 0.75mm thick

MV-20-48-0.75

Comb 48 sample, 0.75mm thick

MV-20-1-1

Comb 1 Prep, 1 Marker, 1mm thick

MV-20-5-1

Comb 5 sample, 1mm thick

MV-20-10-1

Comb 10 sample, 1mm thick

MV-20-18MC-1

Comb 18 sample MC, 1mm thick

MV-20-24-1

Comb 24 sample, 1mm thick

MV-20-30-1

Comb 30 sample, 1mm thick

MV-20-36MC-1

Comb 36 sampl MC, 1mm thick

MV-20-48-1

Comb 48 sample, 1mm thick

MV-20-1-1.5

Comb 1 Prep, 1 Marker, 1.5mm thick

MV-20-5-1.5

Comb 5 sample, 1.5mm thick

MV-20-10-1.5

Comb 10 sample, 1.5mm thick

MV-20-18MC-1.5

Comb 18 sample MC, 1.5mm thick

MV-20-24-1.5

Comb 24 sample, 1.5mm thick

MV-20-30-1.5

Comb 30 sample, 1.5mm thick

MV-20-36MC-1.5

Comb 36 sampl MC, 1.5mm thick

MV-20-48-1.5

Comb 48 sample, 1.5mm thick

MV-20-1-2

Comb 1 Prep, 1 Marker, 2mm thick

MV-20-5-2

Comb 5 sample, 2mm thick

MV-20-10-2

Comb 10 sample, 2mm thick

MV-20-18MC-2

Comb 18 sample MC, 2mm thick

MV-20-24-2

Comb 24 sample, 2mm thick

MV-20-30-2

Comb 30 sample, 2mm thick

MV-20-36MC-2

Comb 36 sampl MC, 2mm thick

MV-20-48-2

Comb 48 sample, 2mm thick

SV = Sample volume for 5mm thick gel (ul)

Catalogue_W07_Electrophoresis

Brochure-005-Electrophoresis