Product Name : SIP Fermentation System (Production Scale)
Product Description

SIP bioreactor,sip fermentation system,sip system

 

proimages/10-Winpact/SIP-200L.png

 

A

Harvest valve sanitary level diaphragm valve

B

Detachable aseptic feeding device

C

Mechanical seal lubricate and automatic cooling device

D

Pump

E

- Pneumatic valves for accurate and automatic control
- Orbital welding provides top quality

 

 proimages/10-Winpact/SIP-parts-Screen-01.png

 proimages/10-Winpact/SIP-parts-Screen-02.png

 proimages/10-Winpact/SIP-parts-Screen-03.png

 proimages/10-Winpact/SIP-parts-Screen-04.png

Monitor page for operation overview

Automatic and manual operation

Automatic sterilization process

Online system calibration

 

Product Introduction

Winpact brand offers pilot and production scale bioreactor/ fermentation systems for all of your large scale fermentation needs. Our standard SIP Production Scale Fermentation System is constructed with BPE standard piping with orbital welding and top grade automatic valves to allow stability and repeatability result for every experiment. All of our features are designed to provide a high level of productivity and automation while maintain a low operation cost. All other great features including total sterilization process, mechanical seal break indication, golden vessel ratio design and complete optional devices for optimizing the fermentation process.

Major Science SIP Fermentation Systems

Features
•  Wide range of vessel selection, from 100 L to 1000 L working volume
•  Multi-lingual 12” and above colored graphical control interface
•  Fully automated process with remote monitoring
•  15-step automatic program setting
•  Orbital welding ensures minimal residue buildup
•  Highest grade construction with Stainless Steel SUS316L
•  Hive jacket design provides astounding temperature control
•  Exhaust pressure relief valve for maximum safety precaution
•  Multiple safety design integration for peace of mind operation
•  Remote monitoring & controlling software free from purchase
•  Password protection for multiple users with customized access levels
•  Various optional devices for process optimization and needs
•  Ethernet communication with Winpact SCADA software, and IP address

Capacity

100 L

200 L

300 L

500 L

1000 L

Total volume

120 L

268 L

360 L

700L

1500 L

Working volume

100 L

200 L

300 L

500 L

1000 L

Vessel and jacket maximum working pressure

3 bar (43.5 psig) / 3 bar (43.5 psig)

Type

Double layered fully enclosed capsule-type tank, with an outer temperature protective layer

Material

Direct contact to medium - 316L stainless steel; all others - 304 stainless steel

Surface finish

Interior polish  25 Ra/in (0.6 μm) Mechanical polishing; Electropolish optional
Exterior polish 
 32 Ra/in (0.8 μm) Mechanical polishing; Electropolish optional

Ports

Ports designed according to user requirements

Piping and valve materials

Parts that directly contact with the product/medium uses 316L stainless steel (≤25 Ra/in) internal polished tubing (BPE standard) :
A.) Internal EP polished diaphragm type pneumatic valve and manual valve (BPE standard)
B.) Tubing all welded with orbital welding
C.) Vessel bottom drain uses a diaphragm valve, to minimize dead volume
D.) Piping designed for ease of transfer to scale up (can be used as a seed fermentation system) or downstream process

Parts that do not directly contact product/medium
A.) Constructed with 304 stainless steel

Controller

12” color industrial touch screen

* User-friendly, graphical control interface
* Includes secure user accounts, with different levels of access
* Use stainless-steel controller cabinet (100 L and above only)
* Modularized and standardized design (Module Skid): ergonomically designed according to height, ease of vessel clean
   up,  and ease of extraction in relation to vessel bottom valve
* Includes maintenance page with system diagnostics
* All programmed setting values are automatically stored into the built-in memory; the settings will not be lost in case of
   power outage/interruption. When power is restored, the interrupted process will automatically resumed

Setting

* Automated sterilization process
* Automated fermentation program

DO

* Control range: 0-100%, adjustable

* Software electrode calibration, with automatic temperature compensation function
* Includes one (1) set of side-inserted stainless steel autoclavable DO electrode

* DO Stat features with intelligent feeding

pH

* PID control with adjustable deadband
* Control range 2.00 to 12.00 pH, ±0.01
* Calibration function with automatic temperature compensation function
* Includes one (1) set of side-inserted, autoclavable pH probe with stainless steel housing

* pH Stat features with intelligent feeding

Pump

* Built-in peristaltic pumps

* Each feeding pump can run adjustable 15-step program
* Each pump can be adjusted for speed, forward and backward direction, and manual or automatic mode
* Each of the four peristaltic pumps can be designated for different functions: acid pump, base pump, antifoam pump, or 
   substrate feeding pump
* Optional fifth and six peristaltic pump available

Temperature

* Vessel temperature is measured with a side-inserted PT-100 temperature probe and maintained using PID control.
* Control range: 0-125°C, ±0.1°C. Operational range up to 85°C

Agitation

* Manual or automatic control of agitation speed
* 15-step program to change speed, or use DO cascade control

Air supply and exhaust

Gas supply and dehumidifer: uses in-house air compressor or air dehumidifier
* Includes re-useable, autoclavable 0.2μm air filter for gas inlet
* Gas Inlet (air)
    Includes mass flow controller:
    2 vvm maximum according to the vessel capacity
* Gas Inlet (oxygen)
   Includes pure oxygen rotameter (manual flow control):
   1 vvm maximum according to the vessel capacity
* Includes oxygen gas solenoid valve, with automatic pulsed time control

Air outlet / Exhaust
* Exhaust port with stainless steel condenser
* Includes re-useable, autoclavable 0.2μm air filter
* Includes automated adjustable gas outlet valve to adjust vessel back pressure
* Can control manually or automatically via software

Utility Requirement

Capacity

100 L

200 L

300 L

500 L

1000 L

Power

Three phase 220V or 380V (note: can be customized to local standard)

Air

At least 7 bar

300 L/min

flow rate

600 L/min

flow rate

900 L/min

flow rate

1500 L/min

flow rate

3000 L/min

flow rate

Dehumidified

Oil-free

Peripheral factory water supply

Cooling water (tap water, at least 15oC below working temperature, must be soft water) ;
Pressure at least 2 bar

Process water

RO Water

Plant steam

≥ 2 bar

Process steam

≥ 2 bar

Drain

In situ drain;

≥ 2"

In situ drain;

≥ 2"

In situ drain;

≥ 2"

In situ drain;

≥ 4"

In situ drain;

≥ 4"

*Customization on the SIP Fermentation system available upon request.

*Please contact your regional manager for evaluation request.

Catalogue_W04_SIP Fermentation

Brochure-012-SIP

Winpact_Cata_04_SIP

Optional Accessories Items
Electropolish (EP) of Vessel Tank

Electropolish of the vessel tank is offered as a higher sanitary grade surface finish. EP surface finish is an addition to the standard mechanical polish (MP) which provides a smoother surface area to minimize residual residue.
*Note that this option MUST be requested at your initial inquiry, later-on additions after completion of construction is not possible

Transfer Piping

Transfer piping of your resulting product/medium between vessels is offered for convenience of operation.
Automated transfer using pressure in addition to directional control with valve regulations offers fast and easy operation.

ORP Probe

The ORP probe measures the oxidation-reduction potential of the fermentation media, which is a crucial indicator of anaerobic
conditions/reactions. This low maintenance and sterilizable probe is designed to withstand repeated experiment.

Turbidity Probe

The turbidity probe measures the turbidity level of the fermentation media, which provides you an indication for the metabolic reaction and in terms allows you to maintaining a steady cell level.

Load Cell

The load cell provides weighing capability to your fermentation process. Weighing the substrate feeding can indicate how much substrate was added during the fermentation process, which allows the user to provide more accurate control accordingly to what the process needs.

Cell Density Monitor

Our special implemented online cell density device allows you to obtain direct information about your cell growth rate and cell density; as these values are critical to many bacterial, yeast and animal cell cultures. Online cell density device combines monitering and probing system, also performs accuracy precisely. Having trouble determine the cell growth rate? Our online cell density is the key to your solution.

Oxygen Mass Flow Controller

Maintain optimal control over culture DO level by installing this optional mass flow controller. The mass flow controller can accurately adjust the flow rate of incoming oxygen and is resistant to fluctuations in gas pressure, ensuring precise control and repeatibility of experimental conditions
A.) Cascade control scheme
B.) Integrated into controller for simple and automated operation

Gas Mixing Station

The gas mixing station allows the user to optimize cell growth conditions by independently supplying up to four gasses to the fermentation process. Parameters such as dissolved oxygen and pH can be controlled by adjusting the gas composition supplied to the system. Four manually adjusted flow meters control the flow rate of each gas, while the 4 solenoid valves automatically open or close in response to the culture conditions. The Gas Mixing Station can be operated in either manual or automatic modes.

CO2 / O2 Off-Gas Analyzer

The CO2 / O2 off-gas analyzer provides real-time measurement of carbon dioxide and oxygen concentration of the bioreactor exhaust gas. The CO2 concentration is determined using a self-calibrating non-dispersion infrared sensor, while an electrochemical sensor monitors the oxygen concentration. Using this information, the user can continuously monitor metabolism and analyze cell growth parameters.

Headplate Lift

For SIP vessel headplate lifting, an device for headplate lifting/removal. Chain-hoist system (manual) for 30 L; Power-driven (auto) for 100 L and above.

CIP Connection Module

For automated cleaning procedures, a CIP system may be used with Major Science SIP fermentation system.
Additional valves, connections, and spray-balls will be installed to allow connection of your own CIP system.
*Note that this option MUST be requested at your initial inquiry, later-on additions after the completion of construction is not possible
*This option is only available with system 100 L vessel and above.

 Operation Platform

 An operation platform is offered to provide optimal operation convenience. Stainless steel constructed platform offers elevated height for a full observation of the headplate when standing on the platform, the chest-leveled positioning of the vessel headplate prevents falling into the vessel.
*This option is only available with system 200 L and above

Catalogue_W04_SIP Fermentation

Brochure-012-SIP

Winpact_Cata_04_SIP